We chose to go with brass on the first prototype to establish a base line. Of course Copper and Sterling-Silver will be standard options for the Kodogu on Matsukaze. The Habaki was modelled in Fusion 360 and it took about a dozen plastic prototypes to… Weiterlesen »Habaki and Menuki for the Prototype are here
Manuel has been working on the Tsuba for the first Matsukaze prototype. It is an iron Mokko-shaped Tsuba with a fine Mimi and bears “千里之行 始於足下” on its Ura side, the old Chinese proverb that means, “a thousand mile journey begins with the first step”.… Weiterlesen »Matsukaze prototype Tsuba
Well, obviously we do over here at Tokensho and lots of it. But what I meant to say is that our polisher Christophe discovered some nice activitiy in the Jigane. Something one would not necessarily expect to see on a blade not forged from Tamahagane.… Weiterlesen »Jede Menge Aktivität...
After some of the no all pleasant discoveries we had to make when the blade first got here (but remember, this is what protoypes are fore), polishing is now progressing nicely. Christophe has now taken the blade to the stage of polishing with the Nagura… Weiterlesen »Komi-Nagura Politur
The Polish is now in the Chu-Nagura stage and Komi-Nagura is next. While polishing, he discovered a small area in which the Shinogi-Ji got accidentally hardened, called Mune-Yaki, which is not desirable to some. Far from being Hitatsura but still … But hey, again: This… Weiterlesen »Chu-Nagura Politur
Not the country or the river but rather the Japanese polishing stone. The initial grind, an associated craftsman in Japan had put the blade through, basically had butchered the Shinogi and the Yokote as I wrote in one of our earlier posts. Shin (Kanemasa) is… Weiterlesen »Zurück nach Kongo
Yakiire, the hardening of Matsukaze. The blade is coated by the mixture of clay and charcoal (Yakiba-tsuchi), and it is suddenly cooled in the water after the heating to approximately 800ºC. In this process also the Hamon is produced by the thickness difference of Yakiba-tsuchi.
火造,(Hidukuri) und 焼きなまし (Nakinamashi), gefolgt von einem kalten Hämmern sind die Schritte, in denen die Klinge ihre (mehr oder weniger) endgültige Form erhält.
Shin hat uns in der Nacht ein paar Bilder geschickt. Er hat ein grobes Sunobe geformt und plant, nächsten Montag mit Hidukuri zu beginnen. Es geht voran!
Shin (our smith Kanemasa-Ono) has been busy forging the first Matsukaze blade. It was forged from a billet of Shirogami 3 (Also known as Shiro-ko), a steel with 0.8% Carbon. White steel (also known as “white paper steel”, named for the wrapping used by its… Weiterlesen »Matsukaze schmieden 1
